Skip to main content
Phytion EcoTracer MONITOR. MEASURE. MONETIZE.
WORKSPACE Facilities Change workspace
FACILITYNonn Family FarmFARM-WI-NONN-01
CURRENT CONTEXTNonn Family Farm
SECTIONOperations
PAGEProcessing Event #10095
Recorded event

FACILITY OPERATIONS · EVENT RECEIPT

Event #10095

Follow the route. Inspect the evidence.

Trace this event from its source tank through pumping and measurement to its recorded destination.

Recorded event measurements

COMPLETED · Reading quality: GOOD
Recorded processed volume
579.54 gal
Included in completed gross throughput
Recorded duration
11.6 min
From the event's start and end timestamps
Total solids
8.0%
Recorded material concentration
Volatile solids
78.0%
Recorded methane-potential input

The calculation preview selects factors by manure type and processing date; review included events before saving. Calculate this event date →

EVENT #10095 / EVENT VOLUMES

NONN · processing flow

Preparing the process scene…
Distribution storage modeled remainder— gal 2,500 gal working capacity Assumed full start · minus metered transfer
Tank volume recorded end1,000.00 gal Occupancy unavailable Start 1,579.54 → end 1,000.00 gal
Processed · meter difference recorded end579.54 gal Event total 579.54 gal
Water storage this event— gal Fill unavailable Assumed empty start · not measured inventory
Recorded start

Recorded tank boundaries · illustrative fill / mix / discharge sequence.

Select equipment to open its record
Flow & volume basis

Bioactive X54 dosing and flotation illustrate the configured sequence; these motions do not establish a saved dose or measured separation. Layer proportions are illustrative. Event volume boundaries and the water-contribution basis below remain unchanged.

The pump serves filling and draining in separate illustrated phases; hose routing is schematic. Distribution uses the user-supplied 2,500 US gal working capacity and an assumed full opening volume. Its modeled remainder equals 2,500 minus the cumulative metered inlet transfer. No refill is assumed; a transfer above capacity is flagged. This is a replay model, not a measured inventory reading. Paddle geometry follows the photos; rotation speed is illustrative. Inlet motion does not add a second saved volume. For a draining event, the receiving illustration rises from empty to the recorded starting volume before dosing. That opening fill is not a measured boundary; the recorded readouts retain the saved start. Discharge then replays the saved start/end change. A filling event replays the change during the inlet phase.

Water-tote artwork follows the photograph. The existing 5 × 5 × 5 ft / approximately 935 US gal gross assumption is retained until actual dimensions or a rated capacity are supplied. Distribution and water containers are under Storage. The distribution card uses the working capacity; no manufacturer rating, dimensions or opening reading have been recorded. Scene sizes are balanced for readability, not a physical scale drawing.

For this event only: processed meter volume × (100% − recorded total-solids %). This treats the non-solids fraction as a water-volume proxy using equal-density and complete-separation assumptions, not a measured recovery yield. When solids are missing, a 90% water assumption is used; invalid solids prevent a water-fill calculation.

Water storage is assumed empty at the start, with no withdrawals. The fill shows this event's calculated contribution, not cumulative or measured inventory. Capacity uses recorded dimensions as a gross rectangular volume, without wall thickness or operating headroom. Excess volume is flagged, not silently discarded. No readings, calculation inputs or accounting records are written.

Source tank · RECORDED READINGS

NONN-PILOT-TANK

TK-FFB5DEDCE9EE4B73B
Rated capacity 2,000.00 gal
START BOUNDARY1,579.54 gal79.0% of rated capacity

Aug 12, 2026 09:00:00

#1136 · GOOD
END BOUNDARY1,000.00 gal50.0% of rated capacity

Aug 12, 2026 09:11:35

#1340 · GOOD

Water storage canister

NONN-WATER-01

Water outlet quantity and container boundary readings have not been recorded.

02 · MEASUREMENT RECONCILIATION Independent operational evidence
Meter totalizer versus tank depletion and receipt
METER EVIDENCE Recorded meter difference 21,493.54 − 20,914.00
COMPARISON BASIS 579.54 gal · nonnegative recorded meter difference
INTAKE WITHIN TOLERANCE
Evidence source Beginning Ending Measured movement Variance
Flow-meter totalizer 20,914.00 21,493.54 579.54 gal Recorded meter difference
Source-tank decrease 1,579.54 1,000.00 579.54 gal 0.00 gal · 0.00%
Destination-tank increase ——Not recorded Water outlet readings not recorded
Maximum variance 0.00% Configured tolerance ≤ 2.00% Source event balance 579.54 gal
How to read this comparison

The available source comparison and any specified destination comparison meet the configured numerical tolerance. This is not accounting authorization. Water outlet quantities are not included in this comparison; their readings are not recorded.

Tank changes support the comparison; they do not replace measured throughput. A dash means unavailable evidence or an undefined percentage. For zero meter volume, inspect absolute gallon differences.

OPERATIONAL EVIDENCE Quality, calibration + equipment support
Evidence supporting this recorded event
TANK TELEMETRY Source and destination
Source readings #1136 → #1340
Destination readings Not applicable
Source qualityGOOD → GOOD
Destination qualityNot applicable
PUMP OPERATION NONN-PU-01
Evidence rows2
Runtime11.6 min
Average flow25.0 GPM
Energy0.290 kWh
Recorded qualityGOOD
FLOW-METER CALIBRATION NOT FOUND
Calibrated —
Measured accuracy—
Certificate Not recorded
Recorded resultNot recorded
Next calibrationNot recorded
QUALITY PROPAGATION GOOD
Related alarms 0
ReconciliationINTAKE WITHIN TOLERANCE
Calculation reviewMethod run
Reading times & evidence notes

Source tank

Start reading
Aug 12, 2026 09:00:00
End reading
Aug 12, 2026 09:11:35

Boundary selection: the start uses the latest reading in the preceding hour; the end uses the earliest reading in the following hour.

A GOOD reading code describes reading quality. Evidence completeness, calibration and result authorization are reviewed separately. Calculation review is determined by the selected method run.